Propeller Robot Controller
First Place Robot in the CowBot (Cowboy Robots)
competition at the IEEE Latin American Robocup (LARC)
by computer engineering student Daniel Maturano and
mechanical engineering student Guillermo Zañartu at the
Pontificia Universidad Catolica de Chile (PUC)
At the heart of the winning CowBot robot was one of our
PRC boards, which provided ample convenient connectors
for all the servos and the myriad of sensors. Way to go!
This web page was last updated on Sun, 10 Aug 08 at 1133 hours
[Click on any picture below to enlarge]
 |
PRC Board with Parallax LCD Display |  |
mods to add composite video display connector |
 |
PRC Board Rev 1.02 - production board |  |
PRC Board Rev 1.02 - minimal assembly |
 |
PRC Board Rev 1.02 - nearly assembled, undergoing testing, running BlinkingLED.spin |
 |
PRC Board Rev 1.02 - final prototype |
 |
PRC Board Rev 1.02 - hooked to Mark's 'Bot - 12 servos |  |
PRC Board rev 1.02 - in action |
 |
Rev 1.02 production board layout |  |
Rev 1.02 production board schematic |