Since 10/1/2007, all Wulfden Freeduino Kits have been shipping with ADABOOT - an Arduino(R) compatible bootloader based upon the Arduino bootloader. "Lady Ada", Limor Fried, of Adafruit Industries, made numerous corrections and additions to bring us what amounts to being a universal bootloader. It is useable on old, new and homebrew platforms with or without auto-reset capabilities of Arduino-0009 and the Diecimilia (R).
| bootloader | NG | Diecimilia | ADABOOT |
| power up | enter bootloader,10 second timeout to sketch | direct to sketch | direct to sketch |
| manual or auto reset | enter bootloader, 10 second timeout to sketch | enter bootloader, almost direct to sketch | enter bootloader, 10 second timeout to sketch |
| on completion of sketch upload | enter bootloader, 10 second timeout to sketch | direct to sketch | direct to sketch |
| abort bootloader | send "ZZZZZ" | send "ZZZZZ" | send any character other than '0' |
| upload progress | hardware on TX/RX lines | hardware on TX/RX lines | put LED on Digital 13 |
| Digital 13 signature | 3 very fast blinks at start of bootloader mode | single blink evey two seconds | pause, then 4 blinks, pause, then blinks to indicate ADABOOT version, at start of bootloader mode |